Know what you’re
taking with you.
Your truck. Your trailer. Your actual load. Bring the numbers together, and see where every limit stands.
Your inputs stay on this device.
01 / Vehicle
Match a reviewed configuration, or enter limits from your own documents. Leave anything you cannot verify unknown.
Changing configuration clears vehicle labels, vehicle weights, scale tickets, and receiver ratings for re-entry. Reconfirm your load inventory for the selected vehicle.
0 matching source rows. Match the full equipment conditions below.
Your vehicle labels
Specific to your vehicleThe combined occupants and cargo limit on your Tire and Loading Information label. Do not use advertised maximum payload.
Gross Vehicle Weight Rating on your vehicle certification label.
Front axle rating on the certification label. Checked only against an actual steer axle measurement.
Rear axle rating on the certification label. Total vehicle mass cannot establish this check.
Published towing limits
Match the exact configurationThe applicable combined weight rating for your exact configuration and equipment.
Enter the applicable rating from the manufacturer. Confirm the equipment and loading basis below.
A table rating is conditional. Additional passengers, options, cargo, and hardware can reduce it. Use the instructions for your exact year. There is no universal driver allowance here.
Document a trailer-rating reduction
What to bring to the calculation
Your vehicle’s payload and certification labels; the applicable manufacturer GCWR and trailer rating; trailer GVWR; installed receiver, ball mount, ball, and coupler ratings; and your loaded weights. Leave unknown values blank.
Without weight distribution, a ready-to-travel vehicle V and full loaded trailer T weigh V + T together. Static tongue weight H is part of T. Vehicle axle mass is V + H. With WDH, use actual adjusted axle measurements.
Each check reports Within entered limits, Exceeds limit, Not evaluated, or Depends on actual weight for a range crossing a limit. There is no overall pass for an incomplete sheet. Read the full method or plan a scale visit.